Sharp Sharp solo and grill microwaves fault codes
The YC-PS and YC-PG families. No protection section and no codes in the manual; troubleshooting is the cup-of-water self-check and a symptom chart.
Codes on the Sharp solo and grill microwaves follow the same Sharp scheme as the rest of the range. Where a code behaves differently on this generation, the code page says so.
Sharp fault codes
Every published Sharp code. Open a code to see which models and years it applies to.
- E01Overheating protection. Sharp’s appliance has sensed a high temperature and stopped itself, and STOP/ECO is what clears the display.Get it checked
- E02Low temperature protection — the odd one. The appliance has stopped because a temperature reading was implausibly low rather than high.Get it checked
- E03Sensor malfunction protection, with a warning tone. Sharp name E03 and E04 in one sentence and explain neither separately.Get it checked
- E04The code no other brand on this platform publishes. Sharp document it only by naming it beside E03, with the same cause and the same remedy.Get it checked