Siemens Siemens iQ700 fault codes
The top range. Siemens publish no launch years for any dishwasher range, so none is given here rather than estimated. Model numbers such as SN97TX02CE.
Codes on the Siemens iQ700 follow the same Siemens scheme as the rest of the range. Where a code behaves differently on this generation, the code page says so.
Siemens fault codes
Every published Siemens code. Open a code to see which models and years it applies to.
- E20The rinsing circuit has reported a fault, and Siemens point at the circulation pump. This is the pump that drives the spray arms, not the one that empties the machine.Get it checked
- E08There is too little water in the machine for it to rinse properly, and Siemens’ first suggestion is not a repair at all — it is how you loaded it.Usually simple to fix
- E09A fault in the heating system. On these machines the element is usually built into the pump housing, which is what makes this a bigger job than it sounds.Get it checked
- E06Siemens report a faulty door sensor or faulty electronics. The door switch is what tells the machine it is safe to throw water about, so nothing runs until it is happy.Get it checked
- E07A fault in the drying system. Worth knowing what your machine uses to dry before you spend anything, because on BSH machines there are three quite different answers.Get it checked