Beko hob fault codes

Beko put their hob codes in the manual rather than on the support site, and the manual is better than most. They print the residual heat mapping in words where BSH only show symbols, they publish a power-cut caveat nobody else mentions, and their code table separates the displays that mean the hob is protecting itself from the ones that mean it is broken.

Where the code shows on a Beko

Beko print codes with a space in them, so the manual shows E 22 where you would type E22. Both mean the same thing. The two-letter display FF is not a fault code at all and neither is the residual heat letter, which Beko give in two cases: capital H for high temperature and lower case h for low.

How to reset a Beko

Beko give the same first step for their genuine fault codes: switch the hob off, leave it 30 seconds, and switch it back on. Their overheating codes need no reset at all — they clear themselves once the temperature comes back below the limit. Because a hob is wired to a cooker circuit rather than plugged in, switching off means the cooker switch on the wall or the breaker in the consumer unit rather than a plug.

Most common Beko faults

The Beko codes people look up most.

Every Beko fault code

6 published codes. Filtering happens in the page — every one is in the HTML.

Filter Beko codes

Sort

Showing 6 of 6 codes

Every published Beko fault code with its meaning and severity
Code	What it means	Severity
h	Lower case h is Beko’s low-temperature residual heat. The one to know is that after a power cut the indicator does not light at all, and the glass is still hot.	Usually simple to fix
E 27	The pot is not one the hob can work with. Beko give it two code numbers — E 27 and E 47 — and both mean the same thing.	Usually simple to fix
FF	Beko’s most distinctive display, and it is not a fault. Something is touching the control panel — a hand, a pan, or a spill.	Usually simple to fix
E 22	The hob has overheated and backed off. Beko ask for nothing but time — it clears itself once the temperature drops below the limit.	Usually simple to fix
E 42	Beko name this one as an incorrect wiring connection — and also list it inside a hardware fault range, in the same table. The wiring reading is the useful one.	Get it checked
E 23	Beko give E 23 and E 24 one meaning, a software error on the induction hob, and one remedy: off for thirty seconds, then the dealer if it returns. Often misread as AF 23.	Get it checked

Beko models

Codes can differ between generations. Check yours.

Guides that help with Beko faults

Looking for Beko’s own support? www.beko.co.uk. We are not affiliated with Beko.