Rangemaster Eclipse 90 induction fault codes
Guide U111125-03. Carries the owner-facing table, where E5 is an over-temperature code and E3 is a supply voltage code. This is Table A.
Codes on the Eclipse 90 induction follow the same Rangemaster scheme as the rest of the range. Where a code behaves differently on this generation, the code page says so.
Rangemaster fault codes
Every published Rangemaster code. Open a code to see which models and years it applies to.
- E5Rangemaster publish two meanings for E5 in two different guides — an over-temperature in one, a mains voltage error in the other. Check which guide covers your model.Get it checked
- E3Two tables, two meanings. On the Eclipse 90 it is the supply voltage outside the rated values; on the RMB60HPEIGL it is a pan problem, and Rangemaster publish the test that separates pan from hob.Get it checked
- E1The cooling fan is disabled. Rangemaster offer no reset for this one — the published action is to call a service agent.Get it checked
- EAAnother code Rangemaster publish two ways — a coil saturation error you can reset in one guide, a hardware fault in the other.Get it checked
- ECA supply voltage error. Reset it once, and if it comes back stop resetting — the hob is reporting something about the circuit feeding it.Get it checked
- C1One of the C1 to C8 microprocessor alerts. Rangemaster’s published remedy is to switch off and on and carry on using the hob.Usually simple to fix