Falcon Falcon 900S Induction fault codes
Guide U110267-05c, downloaded from rangemaster.co.uk. The one book of the three compared that adds the child lock question to the will-not-switch-on list; the child lock, the display legend, L1/L2 and the two-second display flash are in it and in the 1092 and Toledo+ books alike.
Codes on the Falcon 900S Induction follow the same Falcon scheme as the rest of the range. Where a code behaves differently on this generation, the code page says so.
Falcon fault codes
Every published Falcon code. Open a code to see which models and years it applies to.
- Which code table applies to a FalconFalcon and Rangemaster publish one troubleshooting section between them. The guides come from rangemaster.co.uk, share internal document numbers, and the code text matches word for word.Usually simple to fix
- Gas hotplate will not light or will not simmerTwo Falcon-specific answers: the low flame position is past high rather than between high and off, and the control knob has to be held in for about ten seconds.Get it checked
- Hob controls lockedFalcon’s rotary child lock is engaged by holding the two left-hand hob controls anticlockwise. The A symbol flashing while it locks is published as normal.Usually simple to fix