Hotpoint TCD series condenser fault codes
Older condenser range using the single F number. Its manual is the source of the F10 and F15 remedy and of the removable-condenser cleaning procedure.
Codes on the TCD series condenser follow the same Hotpoint scheme as the rest of the range. Where a code behaves differently on this generation, the code page says so.
Hotpoint fault codes
Every published Hotpoint code. Open a code to see which models and years it applies to.
- Safety noticeOver five million vented and condenser dryers built between 2004 and 2015, across six badges. The stop-use notice was recorded as ongoing by the regulator in 2019 and is still on the manufacturer’s site.Stop — call an engineer
- F15A real dryer fault you can usually clear yourself in ten minutes. Hotpoint’s own website will tell you it is a washing machine heating fault and offer you a paid engineer.Get it checked
- F10The other code with a free fix. Hotpoint’s own light decoder responds to it by saying no errors were found, so owners are told their fault does not exist.Get it checked
- F1 E1One of fourteen two-part codes that all share a single remedy. The remedy opens with a safety instruction Hotpoint never explain, and it is the most important part of it.Get it checked