Hotpoint fridge or freezer fault codes
Hotpoint publish a proper fridge freezer code table, which puts them ahead of most mass-market brands sold here and of every other badge in their own group — Whirlpool and Indesit publish no fridge codes at all. Eleven codes, E0 through E9 plus EE, and two of them have genuine owner fixes.
Where the code shows on a Hotpoint
Hotpoint use a single letter and a digit, E0 to E9, plus EE. Their own page opens by asking whether you have noticed E0 or E8, so those are the two they expect to see. Be aware that E7 and E8 carry identical published wording — both are given as an environmental temperature sensor fault — so if you are trying to work out which of the two you have from the meaning alone, Hotpoint do not distinguish them and neither will we.
How to reset a Hotpoint
Hotpoint publish no code-clearing sequence for fridges, because most of these codes are sensor or board faults that will simply return. What they do publish is a safety instruction worth repeating before anybody starts: make sure the appliance is unplugged from the mains before replacing any part. For the two codes with owner steps — the high temperature alarm and the defrost sensor — the remedy is a physical check rather than a reset.
Most common Hotpoint faults
The Hotpoint codes people look up most.
- E9Get it checkedFreezer high temperature alarm, and the only Hotpoint fridge code with a genuine owner cause. Their published first suspect is a door left open.
- E3Get it checkedLabelled a defrost sensor fault, but Hotpoint attach an oddly specific owner check to it: the drain pipe and the plumbing under your sink.
- E1Get it checkedA temperature sensor fault. Hotpoint route these straight to an engineer, and the reason is consistent across the whole industry rather than unhelpfulness.
- E0Get it checkedIce maker fault, and one of the two codes Hotpoint lead their own page with. It only applies if your appliance actually has one.
Every Hotpoint fault code
4 published codes. Filtering happens in the page — every one is in the HTML.
Showing 4 of 4 codes
| Code | What it means | Severity |
|---|---|---|
| E9 | Freezer high temperature alarm, and the only Hotpoint fridge code with a genuine owner cause. Their published first suspect is a door left open. | Get it checked |
| E3 | Labelled a defrost sensor fault, but Hotpoint attach an oddly specific owner check to it: the drain pipe and the plumbing under your sink. | Get it checked |
| E1 | A temperature sensor fault. Hotpoint route these straight to an engineer, and the reason is consistent across the whole industry rather than unhelpfulness. | Get it checked |
| E0 | Ice maker fault, and one of the two codes Hotpoint lead their own page with. It only applies if your appliance actually has one. | Get it checked |
Hotpoint models
Codes can differ between generations. Check yours.
Guides that help with Hotpoint faults
How to reset a fridge freezer, and what a reset cannot fix
Unplug and wait works on some fridges and proves nothing on others. The published waits, the demo-mode trap that survives a power cycle, and when to stop.Read the guideFridge door seals, ice build-up and noises: fix or call?
The three things a fridge does when something is wrong, which of them you can put right, and the one rule that keeps a defrost from becoming a gas leak.Read the guide
Looking for Hotpoint’s own support? www.hotpoint.co.uk. We are not affiliated with Hotpoint.