Neff 141 fault codewhat it means and how to fix it
Neff publish no meaning for 141 at all. Their page says only that you should book an engineer, and we are not going to invent the rest.
Take care
Get a qualified appliance engineer to look at your Neff 141
We do not pass enquiries to a repair firm, so there is no form here. When you book a qualified appliance engineer, tell them the make, the model and the exact code or message on the display, and ask whether they carry parts for this make — that is what turns one visit into a repair rather than a quote.
What 141 means
This page exists because the honest answer is unusual and worth stating. Neff maintain a support page for error 141 and it contains no explanation of what the code means. There is no cause, no component, no symptom description — only the instruction to book a Neff engineer to inspect and repair. We looked for a meaning in their documentation and did not find one, so we are not going to supply one.
What we can tell you is what that absence implies and what to do with it. A manufacturer who publishes a page for a code and then declines to say what it means is usually indicating that no owner action exists, which is a different thing from the code being trivial or from it being catastrophic.
Neff treat 135 similarly, describing it only as possibly indicating an electrical or module fault and offering no owner step. Compare that with F3, which they also class as an electrical fault but for which they do publish a remedy — disconnect from the power supply, wait a few seconds, reconnect. So Neff are making a distinction between faults where a power cycle is worth trying and faults where it is not, and 141 is in the second group. Before you book, it is worth trying the F3 remedy once anyway, since it costs nothing and a genuinely transient electronic state will clear.
What causes it
| Cause | What is actually happening | How likely |
|---|---|---|
| A fault Neff have chosen not to describe | By definition. They publish a page for it and give no meaning, cause or symptom. | Common |
| Electrical or module fault | Inferred from the company Neff keep it in — 135 is described as possibly an electrical or module fault and handled the same way. | Occasional |
Can you fix it yourself?
Stop — this needs an engineer
What it costs to fix
Typical repair cost
£90–£300
Time on site
10 minutes
A diagnostic visit is typically £90 to £150, usually offset against the repair. Beyond that nothing can be priced from this code, because Neff publish nothing about what it is.
Typical UK prices including parts and labour, updated September 2026. Your quote may differ.
Own this appliance and had this code? . Nothing is published until a person has read it.
Related Neff fault codes
- F3Get it checkedF3 is the one short F-code Neff call an electrical fault rather than a protection. Their published remedy is a power cycle at the wall; if it returns, it is an engineer.Related: electronics and power
- DashesGet it checkedFlashing dashes in the zone displays, and no digits, is Neff’s electronics-fault indication. Their published first step is to cover the control panel with your hand to acknowledge it.Related: electronics and power
- EGet it checkedA lone E in a zone display is a stored fault code you have not read yet. Neff’s instruction is to press and hold the zone’s control to reveal the actual code.Related: electronics and power
- AnimationsUsually simple to fixMoving patterns on a Neff hob display that will not respond are the hob doing self-maintenance, such as a firmware update. Neff say to wait until they stop, then switch on.Related: electronics and power
- F5Usually simple to fixHot cookware is sitting too close to the control panel. Neff publish two versions, and whether a power level shows alongside tells you which you have.Related: same brand
- F2Usually simple to fixF2, F4 and the long codes E7015, E8207 and E8208 all mean the control electronics overheated and shut one or more zones off. Let it cool, then touch any button.Related: same brand
Own a Neff hob? Save it and its codes come first next time.
Related guides
Technical review
Not reviewed by an engineer
No engineer has read this page. Severity follows what the manufacturer publishes, and we would rather tell you that than let a byline imply a sign-off.
Sources and how we verified this
We establish the facts from the sources below and then write the explanation ourselves. We do not copy manufacturer wording and we do not host their manuals.
- Manufacturer support portal
This page has not been reviewed by an engineer, and we would rather tell you that than imply otherwise. The severity rating follows what the manufacturer publishes: where they say isolate the appliance and call someone, so do we.