Beko dishwashers fault codes
Beko dishwashers show faults as an E followed by two digits, and the honest headline is that Beko publish very few of them. Their manuals document four — E01, E02, E06 and E07 — and not every manual carries even those. If you have found a longer Beko list elsewhere, it did not come from Beko.
Where the code shows on a Beko
Beko print their own warning alongside the code table, and it is worth repeating in their words: the error codes can change depend the model. That is not a caveat we have added for safety. Of nine current Beko UK dishwasher manuals we checked, only three contain a code table at all, and the other six offer general troubleshooting with no codes whatsoever. So the first thing to do is find the manual for your exact model number. On machines with no digital display Beko name the specific programme lights that blink for each code rather than asking you to count flashes — P1 for one fault, P2 and P6 together for another, and so on.
How to reset a Beko
Beko describe what they call an error algorithm running and the cycle ending, rather than a reset you perform. Their instruction where a fault repeats is consistent and blunt: on the two most serious codes, cut off the electricity, close the valve, and get in touch with an authorised service agent.
Most common Beko faults
The Beko codes people look up most.
- E02Get it checkedWater outage error — the machine asked for water and none came. Beko send you to the supply and the filters first.
- E01Stop — call an engineerWater in the chassis. Beko’s own instruction is to cut off the electricity and close the valve — the bluntest wording of any brand we cover.
- E06Get it checkedTemperature sensor faulty. Beko tie it to a specific symptom — the code plus poor washing means get it looked at.
- E07Get it checkedFlowmeter faulty. The machine has lost its way of counting water, which is why Beko want the valve closed.
Every Beko fault code
4 published codes. Filtering happens in the page — every code is in the HTML.
Showing 4 of 4 codes
| Code | What it means | Severity |
|---|---|---|
| E02 | Water outage error — the machine asked for water and none came. Beko send you to the supply and the filters first. | Get it checked |
| E01 | Water in the chassis. Beko’s own instruction is to cut off the electricity and close the valve — the bluntest wording of any brand we cover. | Stop — call an engineer |
| E06 | Temperature sensor faulty. Beko tie it to a specific symptom — the code plus poor washing means get it looked at. | Get it checked |
| E07 | Flowmeter faulty. The machine has lost its way of counting water, which is why Beko want the valve closed. | Get it checked |
Beko models
Codes can differ between generations. Check yours.
Looking for Beko’s own support? www.beko.co.uk. We are not affiliated with Beko.