Beko Er 93 fault codewhat it means and how to fix it
Card and timer errors, Er 93 to Er 99. Card means the control board, and this is the last band in Beko’s table.
Take care
What Er 93 means
The final band runs from Er 93 to Er 99 and Beko head it card and timer errors, answered as ever with the instruction to consult an authorised service. Card is worth translating, because it is not a word British owners use for this. It means the control card — the printed circuit board carrying the oven’s electronics — and the usage is common across European appliance documentation. Pairing it with the timer makes sense: on most ovens the clock and the control logic live on the same assembly, which is also why a fault here can present as a display doing something strange rather than as anything to do with cooking.
What that means practically is that the symptom to describe is what the panel is doing. A display that has gone blank, one showing nonsense, a clock that will not hold its setting or an oven that has stopped responding to its controls all point this way. As with every other band except Er 5, Beko publish nothing for an owner to try, and there is no reset in their oven documentation to fall back on.
What causes it
| Cause | What is actually happening | How likely |
|---|---|---|
| A fault on the control card | Card is the printed circuit board carrying the oven electronics, a usage common across European appliance documentation but unfamiliar here. | Common |
| A fault in the timer or clock function | Beko pair the two in one band, which fits ovens where the clock and the control logic sit on the same assembly. | Common |
| Beko publish no distinction between the seven codes | One band name and one solution sentence cover Er 93 through Er 99, so nothing published narrows it beyond the category. | Common |
What to try yourself
Note what the display is actually doing — blank, showing nonsense, losing the clock, ignoring the controls. That symptom is the useful part.
Check whether the clock holds its setting after the oven has been left for a while, since a clock that keeps clearing is a specific and reportable behaviour.
Turn the function knobs off and back to the position you want, which is the only reset-shaped instruction Beko publish for an oven.
Contact an authorised service with the exact number and the display behaviour. Beko publish no owner remedy for this band.
Get a qualified appliance engineer to look at your Beko Er 93
We do not pass enquiries to a repair firm, so there is no form here. When you book a qualified appliance engineer, tell them the make, the model and the exact code or message on the display, and ask whether they carry parts for this make — that is what turns one visit into a repair rather than a quote.
What it costs to fix
Typical repair cost
£120–£320
Time on site
10 minutes
A control board is one of the more expensive oven parts. On an older appliance the repair can approach the cost of replacement, so get it quoted.
Typical UK prices including parts and labour, updated September 2026. Your quote may differ.
Own this appliance and had this code? . Nothing is published until a person has read it.
Related Beko fault codes
- Er 1Get it checkedCommunication errors, Er 1 to Er 7. Also the place to explain how Beko’s oven codes work, because the band is all the meaning there is.Related: controls and clock
- Er 72Get it checkedHardware related errors, Er 72 to Er 80. A category name that raises an obvious question, since every other band is hardware too.Related: controls and clock
- Er 86Usually simple to fixInternet connection errors on HomeWhiz models. The one band in Beko’s table where the fault costs you nothing — the oven still cooks.Related: controls and clock
- HUsually simple to fixNot a fault and not in Beko’s code table. The door lock is still active after a self-clean, and the oven will not cook until it has cooled.Related: same brand
- Er 32Get it checkedOven heating errors, covering Er 32 to Er 41. This is the band for an oven that lights up, whirs and never gets hot.Related: same brand
- Er 8Get it checkedSensor errors. Beko’s widest band, covering twenty codes from Er 8 to Er 27, all with the same two-word meaning and the same answer.Related: same brand
Own a Beko oven? Save it and its codes come first next time.
Related guides
Technical review
Not reviewed by an engineer
No engineer has read this page. Severity follows what the manufacturer publishes, and we would rather tell you that than let a byline imply a sign-off.
Sources and how we verified this
We establish the facts from the sources below and then write the explanation ourselves. We do not copy manufacturer wording and we do not host their manuals.
- Manufacturer technical and service documentation
This page has not been reviewed by an engineer, and we would rather tell you that than imply otherwise. The severity rating follows what the manufacturer publishes: where they say isolate the appliance and call someone, so do we.