Beko oven fault codes

Beko publish oven error codes, but only for their pyrolytic models, and only in bands rather than individually — Er 8 to Er 27 all mean "sensor errors" and nothing more precise. Before you look yours up, know that for eleven of the twelve bands Beko’s published answer is the same sentence: consult an authorised service. There is one exception, and it is Er 5. And if your door is locked after a self-clean with an H on the display, that is not in the code table at all and it is not a fault.

Where the code shows on a Beko

Three things about Beko oven codes will save you time. First, the table only exists for pyrolytic ovens. We read 34 Beko oven manuals and exactly three contain a code table — the three pyrolytic models. The correlation is perfect in both directions, so if your Beko is not a pyrolytic model, Beko have published no code table for it and the troubleshooting section in your manual is what they offer instead. Second, the codes are banded. Beko do not tell you what Er 47 means; they tell you that Er 42 to Er 58 are oven component errors. The bands run contiguously from Er 1 to Er 99 with no gaps and no Er 0 or Er 100, so every number falls in exactly one band, but the band is the smallest unit of meaning Beko provide. Third, the format is Er followed by a space and a number — Er 5, not ER5 or E5 or Err 5 — and Beko are consistent about that across all three manuals. Two of their category names need translating. Oven lid errors, for Er 59 to Er 64, is Beko’s phrase for the door. And oven security errors, for Er 81 to Er 85, is almost certainly safety rather than security: Lamona, whose ovens the documentary evidence says are Beko-built, print the same table with the same band and call it oven safety errors.

How to reset a Beko

Beko publish no reset procedure for an oven. That is a finding rather than an omission on our part: we searched all 34 UK oven manuals for reset-shaped instructions — wait ten seconds, isolation switch, switch off the product and, reset — and the only hit is about the minute minder, not the appliance. There is no switch it off at the wall for N minutes anywhere in the Beko oven documentation. The nearest thing they offer is a knob cycle rather than a power cycle: turn the function knobs off and then back to the position you want, which appears in their troubleshooting section. This matters because how to reset a Beko oven is a common search and the honest answer is that Beko have not published one. Lamona, whose ovens the documentary evidence indicates are Beko-built and whose code table is Beko’s with a few bands removed, do publish one — wait ten seconds — on Howdens’ own site. We mention that because it is a genuine contradiction between two official sources describing the same hardware, not because we are recommending you apply one brand’s instruction to another’s appliance. If you do isolate the oven, do it at the cooker switch or the breaker rather than looking for a plug.

Most common Beko faults

The Beko codes people look up most.

Every Beko fault code

14 published codes. Filtering happens in the page — every one is in the HTML.

Filter Beko codes

Sort

Showing 14 of 14 codes

Every published Beko fault code with its meaning and severity
Code	What it means	Severity
H	Not a fault and not in Beko’s code table. The door lock is still active after a self-clean, and the oven will not cook until it has cooled.	Usually simple to fix
Er 32	Oven heating errors, covering Er 32 to Er 41. This is the band for an oven that lights up, whirs and never gets hot.	Get it checked
Er 8	Sensor errors. Beko’s widest band, covering twenty codes from Er 8 to Er 27, all with the same two-word meaning and the same answer.	Get it checked
Er 59	Beko call this band oven lid errors, which is their phrase for the door. Er 59 to Er 64 cover the door and its lock.	Get it checked
Er 1	Communication errors, Er 1 to Er 7. Also the place to explain how Beko’s oven codes work, because the band is all the meaning there is.	Get it checked
Er 42	Oven component errors, Er 42 to Er 58. Seventeen codes under the vaguest heading in Beko’s table — a catch-all inside a catch-all.	Get it checked
Er 5	A meat probe communication error, and the only Beko oven code with anything for you to do. Remove the probe and you can carry on cooking.	Get it checked
Er 81	Beko print this band as oven security errors. Lamona, whose ovens the documents show are Beko-built, print the same band as oven safety errors, which is a meaningful difference.	Get it checked
Er 93	Card and timer errors, Er 93 to Er 99. Card means the control board, and this is the last band in Beko’s table.	Get it checked
Er 72	Hardware related errors, Er 72 to Er 80. A category name that raises an obvious question, since every other band is hardware too.	Get it checked
Er 28	Meat probe errors, Er 28 to Er 31. Beko give this band no workaround, which is the opposite of how they treat the probe code in Er 5.	Get it checked
Er 86	Internet connection errors on HomeWhiz models. The one band in Beko’s table where the fault costs you nothing — the oven still cooks.	Usually simple to fix
Er 89	Microwave errors, Er 89 to Er 92, on combination models only. The one band where the do-not-open advice is more than routine caution.	Get it checked
Er 65	Steam errors, Er 65 to Er 71. Beko gate this band explicitly — it can only appear on ovens with a steam function.	Get it checked

Beko models

Codes can differ between generations. Check yours.

Guides that help with Beko faults

Looking for Beko’s own support? www.beko.co.uk. We are not affiliated with Beko.