Stoves Sterling Deluxe electric induction 100–110cm fault codes
Built 2022 onwards
The third model on the 2022-generation manual. Sterling timers are also the ones Stoves single out as having three physical buttons rather than touch keys.
Codes on the Sterling Deluxe electric induction 100–110cm follow the same Stoves scheme as the rest of the range. Where a code behaves differently on this generation, the code page says so.
Stoves fault codes
Every published Stoves code. Open a code to see which models and years it applies to.
- HStoves publish H as a residual heat indicator: the glass is still hot. It shows above about 60°C and clears below about 55°C on their documents.Usually simple to fix
- ER03Stoves publish ER03 as an obstruction indicator that sounds a continuous tone as well as showing on the display. Something is covering the touch controls, or the glass needs cleaning.Usually simple to fix
- E2Stoves publish E2 as an over-heat indicator on current guides and as overheating of the induction coil on the 2022 manual. Remove the pans and let the hob cool for about 30 minutes.Get it checked
- E8E8 is a 2022-generation Stoves code for a fan blocked or faulty. Their published remedy is to check the fan inlet at the rear of the appliance.Get it checked
- E6E6 appears only on the 2022-generation Stoves manual, where it is an error on the power board with no power to the power board as the cause. Stoves say call customer care.Get it checked
- Zeus app no longer availableStoves publish that the Zeus Appliance Control App is no longer available to download, and that appliances built from May 2022 onwards were not fitted with the Bluetooth-enabled timer.Usually simple to fix