Beko EXX fault codewhat it means and how to fix it
Beko print EXX literally, as a published catch-all for every E-code they have not listed. If your Beko washer-dryer shows an E-code that is not E02 or E03, this is the official answer.
Take care
Get a qualified appliance engineer to look at your Beko EXX
We do not pass enquiries to a repair firm, so there is no form here. When you book a qualified appliance engineer, tell them the make, the model and the exact code or message on the display, and ask whether they carry parts for this make — that is what turns one visit into a repair rather than a quote.
What EXX means
This is an unusual thing for a manufacturer to publish and a genuinely useful one. In the washer-dryer manual covering the BMM5DFO5741W, BMDSC7545B and WTS210, Beko print a row in their fault code table whose display string is literally "EXX", with the fault type given as "Other faults" and the remedy "Turn the selector knob to OFF, unplug, and contact service as soon as possible".
They are telling you in advance that the table is incomplete and that everything not on it routes to the same answer. So if you own one of these machines and it shows E07, or E11, or anything else with a leading zero that is not E02 or E03, the honest answer is not that the code is secret or that a repair site knows something Beko do not.
The answer is that Beko have deliberately not published a meaning for it, and their own instruction is to stop using the machine, unplug it and call service. That is worth knowing because it saves you working through a third-party list of Beko codes that was reconstructed from a different platform entirely, and applying a remedy for a fault your machine is not reporting.
What causes it
| Cause | What is actually happening | How likely |
|---|---|---|
| A fault Beko have chosen not to itemise | By definition. Beko publish meanings for E02 and E03 and route everything else here without explanation. | Common |
| Control board or sensor fault requiring diagnosis | The category of fault a manufacturer typically does not itemise for owners, because no owner remedy exists. | Occasional |
Can you fix it yourself?
Stop — this needs an engineer
What it costs to fix
Typical repair cost
£70–£120
Time on site
10 minutes
A diagnostic visit is typically £70 to £120, usually offset against the repair if you go ahead. There is no way to narrow the cost without knowing the underlying fault.
Typical UK prices including parts and labour, updated September 2026. Your quote may differ.
Own this appliance and had this code? . Nothing is published until a person has read it.
Related Beko fault codes
- No fault codeUsually simple to fixMost Beko washing machines cannot show a fault code at all. Twenty-seven of thirty-three current UK manuals contain no codes whatsoever, only a symptom table.Related: electronics and power
- E29Get it checkedThe machine has put itself into self protection mode because of a supply problem — Beko name line voltage and water pressure as examples rather than as the whole list.Related: electronics and power
- Eb02Get it checkedThe mains supply voltage is outside what the machine will accept. Beko’s remedy is to unplug it, wait ten minutes and plug it back in.Related: electronics and power
- EC1Get it checkedThe parts of the machine have stopped talking to each other. Beko give a two-minute power cycle, and it is worth one proper attempt.Related: electronics and power
- SCGet it checkedBeko’s wording is "Your complaint is not solved during the check". It is the readout telling you the self-test found something it cannot resolve.Related: electronics and power
- ErrUsually simple to fixErr means the safety algorithm is still running in the diagnostic readout. Beko tell you to wait for it to pass and press the buttons again.Related: electronics and power
Own a Beko washing machine? Save it and its codes come first next time.
Related guides
Common questions about Beko EXX
I found my code on a repair site. Why does Beko not publish it?
We cannot tell you why, only what they publish. Bear in mind that third-party Beko code lists are heavily contaminated — many are reconstructed from other platforms, and Beko run two incompatible code sets themselves. A meaning from a list that does not match your machine is worse than no meaning at all.
Can I just switch it off and try again?
Beko do not offer that for this row. Their printed instruction is to turn the selector to OFF, unplug the power cord and contact service "as soon as possible", and there is no retry in it. Write down the exact code before you ring, because the code is what the engineer works from even though the owner manual does not publish it.
Does EXX mean the machine is beyond repair?
No. It means Beko have not published an owner-facing meaning for what your machine is reporting and want it looked at. The fuller code set that the BW1O manuals print — E05, E11, EE0, EE1, EA1, EA2, the Eb family and EC1/EC2 — belongs to the same platform, so if your code is one of those, that page is the closest thing Beko publish.
Technical review
Not reviewed by an engineer
No engineer has read this page. Severity follows what the manufacturer publishes, and we would rather tell you that than let a byline imply a sign-off.
Sources and how we verified this
We establish the facts from the sources below and then write the explanation ourselves. We do not copy manufacturer wording and we do not host their manuals.
- Manufacturer technical and service documentation
This page has not been reviewed by an engineer, and we would rather tell you that than imply otherwise. The severity rating follows what the manufacturer publishes: where they say isolate the appliance and call someone, so do we.