Miele Miele G 7000 AutoDos fault codes
The upper range. AutoDos dispenses detergent automatically from a PowerDisk, which brings codes in the F600s that no other Miele can show.
Codes on the Miele G 7000 AutoDos follow the same Miele scheme as the rest of the range. Where a code behaves differently on this generation, the code page says so.
Miele fault codes
Every published Miele code. Open a code to see which models and years it applies to.
- F11Water left standing in the cabinet because the machine cannot drain. Miele treat this as an owner job and walk you through the drain pump.Get it checked
- F12The water inlet is blocked or restricted. Miele use the same wording for F13 and F15, give F173 the same filter procedure, and warn that the hose connection houses an electrical valve.Get it checked
- F70The Waterproof System has activated. Miele give the clearest emergency instruction of any dishwasher manufacturer — close the stopcock, switch off, unplug, call.Stop — call an engineer
- F69The circulation pump is blocked. Miele distinguish this from a pump fault, and a blockage is yours to clear.Get it checked
- F52A sensor has detected too much foam and stopped the programme. Nothing is broken — the machine is protecting itself from suds.Usually simple to fix
- F86The salt reservoir flap in the door is not closed. On Miele machines with the salt container in the inner door, a lid left open after a refill stops the programme. Ten seconds to fix.Usually simple to fix