Zanussi Zanussi integrated fault codes
Built 2012 onwards
Built-in behind a cupboard door. Worth flagging because the beep-counting method matters more here — the display is hidden behind a door most of the time, and the machine has to be unpacked from the housing to work on.
Codes on the Zanussi integrated follow the same Zanussi scheme as the rest of the range. Where a code behaves differently on this generation, the code page says so.
Zanussi fault codes
Every published Zanussi code. Open a code to see which models and years it applies to.
- E20A draining fault, and on a machine with no display it is the one that beeps twice. Blocked filter, blocked hose, or a failed pump, in that order.Get it checked
- E10A water supply fault, one beep on a machine with no display. The manufacturer gives a pressure range you can actually test against.Get it checked
- E60A heating fault, and the manufacturer tell you to unplug the machine and not plug it back in until you are certain it is safe. There is no owner check.Stop — call an engineer
- E40The door is open or not closed correctly — four beeps on a machine without a display. Overloading is on the manufacturer’s own cause list.Get it checked
- E30Three beeps, and the manufacturer name the water pressure sensor. Then every step they give you is about finding a leak, which is not the contradiction it looks like.Get it checked
- E50A motor failure. The manufacturer’s published instruction is to unplug the machine and not to use it again until the fault has been fixed.Stop — call an engineer
- EF3The Aqua Control leak protection has triggered and put the machine into a safety mode. Turn the water off at the tap and stop using it.Stop — call an engineer
- EH0A mains supply problem, not a water problem — despite what several popular guides say. The manufacturer warns specifically against extension leads here.Get it checked
- E90A configuration or communication fault between the electronic parts. Unplug for thirty seconds, and if it returns quote the exact number when you book the repair.Get it checked