Hotpoint HCS9A9PHTSBA fault codes
Class 8 compact steam oven. The only manual in the range publishing F8E8, and the one that adds the destructive factory reset to the letter-F row.
Codes on the HCS9A9PHTSBA follow the same Hotpoint scheme as the rest of the range. Where a code behaves differently on this generation, the code page says so.
Hotpoint fault codes
Every published Hotpoint code. Open a code to see which models and years it applies to.
- FAn F followed by a number. Hotpoint publish no meaning for any of them — their instruction is to read the number down the phone, not to look it up.Get it checked
- Clock flashingOn some Hotpoint ovens the clock is an interlock, not a convenience. Until the time of day is set, the oven will not cook at all.Usually simple to fix
- KeylockNone of the buttons work. Hold the lock key for at least five seconds to release it — the oven is not broken, the panel is locked.Usually simple to fix
- DEMODemo mode is on, so everything works except the heat. Hotpoint give a free diagnostic tell: the word DEMO appears every 60 seconds.Usually simple to fix
- F3E3The food probe is not making proper contact. One of only two Hotpoint oven codes with a published meaning, and the fix is to check the connection.Get it checked
- ECOThe oven light has stopped coming on. Before you buy a bulb, check ECO mode — on these ovens it turns the light off by design.Usually simple to fix
- F8E8The water and steam system needs descaling. Hotpoint publish a full two-pass cleaning procedure for this, and it is a genuine owner fix.Get it checked